QuestionI have great coverage with AAA. Last night my 19 year old smashed my 1996 Chevy Suburban in an accident with a barrier trying to avoid highway debris. Everyone is OK, thank goodness. No other cars involved or anything. The car has sustained what seems like major damage to the front right side: bumper and grill smashed back, bumper into right front tire, right pull hook in front sheared off, grill pushed into radiator, right fender totally crunched and all lights on that side just crackled up, body damage on that side, hood misaligned, tire won't turn and looks like some crunching happened to frame underneath front end. The car has 135,000 miles on it. Blue book for the car (fair condition) is at most $3500. I wouldn't mind it being totaled out so I can get another 1996 - 1999 same make and model.
Question: What goes into the "totaled out" equation? Does that sound like too much damage to fix for that car? What can i most likely expect? Looking forward to hearing from you and thank you so much for your expertise and time. It is appreciated.
AnswerHi Maafi,
The Total Loss Claim Process
Step 1: Determining the vehicle to be a Total Loss
When you are involved in a collision, you will report the claim to either to your own insurance company or the insurance company of another at-fault party. The insurance company will assign a damage estimator to inspect the damage and write a repair estimate. Once the estimate is written, the repair cost will be compared to the value of the vehicle. Generally, insurance companies will declare a vehicle to be a total loss if the cost of repairs is more than 70% to 80% of the vehicle's value.
Step 2: Doing Your Homework
If you have been informed that your vehicle is a total loss, the insurance company will then take usually a couple of days to determine the value they are going to offer you. During this time, you should do your own research to determine the fair market value of your vehicle. The easiest way to do this is by using the internet. You should check www.autotrader.com . There you can search for currently for sale vehicle like yours, in your area. You should try to locate 5 to 10 vehicles of the same year, make & model, with similar options and mileage. Print out the listings you find and average the values. This will give you a good average value to use as a baseline. However, you must understand that the prices you find are asking prices and virtually all of those prices will be negotiated downward to some degree. Now when the insurance company makes you an offer you will know if it is within a reasonable range or not.
Step 3: Negotiating and Settling Your Claim
Now that you know what your vehicle is worth and what the insurance company is offering you, it is up to you to negotiate if the offer is not reasonable. You can start by sending the documentation you collected in step 2 above and making a demand of what you are seeking to settle the claim. If the insurance company does not properly negotiate with you then you may have to hire a professional vehicle appraiser to properly establish the value of your vehicle. If you are dealing with your own insurance company you can invoke the appraisal clause of your policy. This is a part of your policy that is there to help settle disputes in value between you and your insurance company.
The Appraisal Clause Process
1st party claims with your own insurance company
An appraisal clause is a clause or paragraph found in most but not all insurance policies. It is designed to be a way of reaching a settlement when there is a dispute over the amount of a loss between you and your insurance company and can be invoked by either party. The appraisal clause can be utilized when there is a dispute over the cost to repair your vehicle, the value of your vehicle in a total loss claim or the diminished value of your vehicle if you reside in a state where you can make a 1st party claim for diminished value. The appraisal clause is generally found in the "Damage to Your Auto" section of your policy. Following are the basic steps involved in the execution of the appraisal clause of most policies.
Step 1: Invoking Your Appraisal Clause
You will write a letter to your insurance company telling them that as a result of your inability to reach a mutually agreeable settlement, you are invoking the appraisal clause of your policy. The letter should be sent by certified mail/return receipt requested.
Step 2: Selection of Appraisers
In the appraisal clause process, each side will select a competent appraiser to assess the loss. Each side will be responsible for paying their chosen appraiser. You should select an appraiser who is knowledgeable in the specific area that is the subject of the dispute and who is familiar with the appraisal clause process. Your selected appraiser should be able to be objective and impartial. Your appraiser should not do any work for the insurance company with whom you are having the dispute.
Step 3: Completion of The Process
Your selected appraiser as well as the appraiser selected by your insurance company will each independently appraise the loss. The two appraiser will then communicate and discuss their findings. During this process the two appraisers will attempt to reach a mutually agreeable figure. If the two appraisers are unable to reach an agreement then the two appraisers will mutually select and agree upon a third party Umpire appraiser who will review the positions and documentation of the two primary appraisers and may also do an inspection and assessment of his own. If an umpire appraiser becomes necessary, you and your insurance company will each pay half of the cost of the umpire. Then an amount agreed upon by any two of the three appraisers will be final and binding on all parties.
I hope this helps
Richard Hixenbaugh
