Auto body repair & detailing: auto body repair, auto body repair, drilling holes

Question
Which tool would you use on a dented creased fender, Also on the highs and lows?

Answer
Ron.....if i had one i would use a spot weld puller which welds little rods to the lows and then you attach a puller bar to the rods and pull. This allows you to bring the metal out to where it needs to be and prevents you from drilling holes and using a dent puller.

If I could not get one of these nifty tools I would dolly the metal back out using a hammer and dolly. These can be purchased as a kit for not an arm and a leg.

Mike