Auto Parts: 1985 300zx non turbo, vacuum heat, vacuum lines

Question
1985 300zx non turbo I have been unable to locate a egr vacuum control
soleinoid. My egr valve works. Just turning on and off like it needs to. Right
now I have vacuum line bypassing the solenoid and going straight to egr
valve but would loce to get the part so it is working the way it should any
help would be wonderful thankyou

Answer
Hi Delia,

I think your EGR actuator is vacuum/heat operated so it should be mounted in the intake manifold with two or three vacuum lines coming from it.

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php