Auto Parts: renault megane differential, renault megane coupe, differential gears

Question
hi ther i have a renault megane coupe sport 1600 8v
on the short side driveshaft it pushes into the differntial and bolts to the surround,
now what the driveshaft goes into is a little cylinder with 3 nothces in and gearing on the back end whitch lines into the differential gears to give the drive,
that is retained into the gearing by a circlip and a packer witch must act as a bearing! but i just had it changed after it all riped out!!,
last nite this has happend again could you help me in resolveing this problam as i am unsure what could of caused this! there is now obvious sighn of imperfections could i have movement in wheels or ball joint to make driveshaft pull to much? what do you think?

Answer
Hi Scott,

Send a photo if possible: photos@knucklebusters.us

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php