Auto Parts: windshield washer reservior, chevy tahoe, windshield washer


Question
Hello knucklebusters,
I own a 1997 Chevy Tahoe, V8, 4 door, 3.5l, 350, 4 wd. I need to replace my windshield washer reservior, located on the drivers side toward the front grill. The jug is not in plane view only the filler cap. How do I get to the jug? I have look and can not find nothing to remove the covering.

Answer
Hi Larry,

You'll need to remove the fender an/or inner fender to gain access to the mounts and the res.

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php