Auto Parts: where, pep boys, repair vehicles

Question
I have a 1989 bronco with a 1356 e8ta-ba transfer case where does the vaccuum line go and what does it do I am stuck in 4 low thanks

Answer
Hi Ryan,

the vacuum port you're looking for is at the top of the T-case. You may need to lower it a few inches to access it. I don't know why the case is locked in low-range. The vacuum port only sends a vacuum signal to the front-axle assembly to lock the hubs when the four-wheel drive is engaged.

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php