Auto Parts: intake manifold, olds cutlass supreme, olds cutlass

Question
if i wanted to paint the intake manifold on my 1995 olds cutlass supreme 3.4L DOHC how would i go about taking it off? would i have to drain the coolant out and if so how do i do that?

thanks

Answer
Hi Nick,

Yes you'll have to drain the coolant. Your intake manifold is a two-piece design. To access and remove the lower plenum may be a little more work than you planned for 'painting' a manifold, but that is up to you.

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php