Auto Parts: Lifts, ball joints, universal joints


Question
I have a 2wd sliverado and i would like a leveling kit or a small 3 in.lift kit on it. My question is if i put a lift kit on it will the ball joints in the front go out quickly or will they last for sometime.

Answer
Hi David,

All front end components will suffer if ALL you change is the lift. Spindles need to be changed as well as shock mounts and locations. Ball joints will be the least of your concern but any way you look at it, if the vehicle will be a daily driver, plan to have the ball joints replaced on a yearly basis as well as the universal joints in the driveshaft(s).

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php