Car Alarms: 95 Chevrolet Impala SS

Question
I purchased my 95 Impala a couple years ago.  I didn't know that it had am aftermarket car alarm.  My battery on the car was going dead and this alarm on the car started going off.  I looked around and found a box under the dash that has a switch hooked to it and the box says Hellfire on it.  I wouldn't mind using the alarm system to be honest.  I just don't know how to go about turning it on and how to link it to my key fob.  Any suggestions?  Thanks

Answer
Ok, an installer would place the valet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
INSTALLHELP.com