Car Alarms: Click click starts then click click, flip switch, ford f150

Question
kI bought a ford f150 for work. drove it a week. Parked one night next morning click click as i turned key. Left for two days then as sitting in truck buddy found a black button under dash by door. pressed it trucked started. Now three days after driving come to work park need to move truck and click click. Pushed button and only click click. I need to remove this alarm by three, by pass it so i can move truck if not i am looking at one hella towing bill cause no vehicles can stay over nite.

HELP, PLEASE dont say you answered this before and for me to go here or there. I been looking for hours. I just need help fustrated trying to follow links, search words, key waords.

In dier needs
Thanks Drew

Answer
Hmmmm,
Make sure you do the procedure correctly.
Might have missed a step:

PUT IGNITION KEY IN IGNITION,
KEY ON TO JUST BEFORE CRANKING THE ENGINE.
PRESS IN AND HOLD VALET SWITCH
UNTIL YOU GET A RESPONCE
FROM THE ALARM.

KEY OFF.

This should toggle the alarm in and out of
valet/override.

If toggle type switch.
KEY ON, FLIP SWITCH, KEY OFF,
START THE CAR.

I hope this solved it for you.
If not. look forward to removal/replacement
or repair.

ALARMTEK -
DISARMALARM.com