Car Alarms: Disconnecting car alarm, valet service, honda accord

Question
I have a 2001 Honda accord and this morning after I got to work my alarm valet took a crap on me and now my car won't start without my valet working. What can I do?

Answer
Gotcha, let's put it into valet/service mode,
and try to reset the alarm to default mode.

Ok, loacte the 2 wires that were connected to the
button. Twist them together to make one.
Now, turn on the key forward, just before cranking,
and within a few seconds, press the wires
to a metal part of the frame and hold
there until your alarm responds.

The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected or,
remove it if you like at this point.

Let me know if it works for yours.

ALARMTEK
DISARMALARM.com