Car Alarms: aftermarket Car Alarm 2007 altima, flip switch, switch button

Question
The dealership installed an aftermarket alarm in my car when purchased, now it doesn't work. It seems not to be getting power. The switch doesn't work underneath, the light doesn't even come on on the switch. I made sure the ignition was on when pushing the switch button. I am thinking a fuse but I looked at them and have no idea where they would of added it. Help!

Answer
Hmmmm,
Make sure you do the procedure correctly.
Might have missed a step:

PUT IGNITION KEY IN IGNITION,
KEY ON TO JUST BEFORE CRANKING THE ENGINE.
PRESS IN AND HOLD VALET SWITCH
UNTIL YOU GET A RESPONCE
FROM THE ALARM.

KEY OFF.

This should toggle the alarm in and out of
valet/override.

If toggle type switch.
KEY ON, FLIP SWITCH, KEY OFF,
START THE CAR.

I hope this solved it for you.
If not. look forward to removal/replacement
or repair.

ALARMTEK