Car Alarms: camry alarm system, toyota camry, dash area

Question
I have a 1995 Toyota Camry 220sei and my remote xmitter has gone  on the blink, I replaced the batteries and it still does not work I have as well lost the override key which you would push into a socket in the trunk. I am unable to open the car as the alarm goes off can cannot start it. do you have any advice on how i acn get my car going please help.
   Thank you       Melville Thompson

Answer
Ok, try the following:

PUT IGNITION KEY IN IGNITION,
KEY ON TO JUST BEFORE CRANKING THE ENGINE.
PRESS IN AND HOLD VALET SWITCH FOUND UNDER THE DASH
AREA UNTIL YOU GET A RESPONCE FROM THE ALARM.

KEY OFF.

This should toggle the alarm in and out of
valet/override.

If toggle type switch.
KEY ON, FLIP SWITCH, KEY OFF,
START THE CAR.

If this is not solving the issue,
please go to the site we set up
to deal with all of these requests
for disarming the security in any
given vehicle. It is a liability to
publicly share that level of information
here at ALLEXPERTS.

Obviously, posting this sort of sensitive information
for all to see and implement is not a good idea.
Since we are liable if my info is used to perpetrate a crime,
we sell it for a very modest fee, and keep track of who buys
it in case it should come back to us for review.

If wanting this information to solve your disarming issue.,
please go to DISARMALARM.com so I can get you the
info you require to fix your particular situation.

I hope to be able to help you
with this problem in the near future.

Robert Martin-
ALARMTEKONLINE-
DISARMALARM.com