Car Alarms: viper 5901 install on 2009 tacoma, starter wire, designtech

Question
Hi im trying to install this remote start system on my truck and have everything wired up except a few things. I am stuck on the remote start harness, specifically how I wire this harness to the two starter wires on my truck. I know for starter 1 input/output i cut the first starter wire and attach the output to the starter and the input to the key side but how do I connect the harness to the second starter wire? I'm using the flex relay in/out wires as my starter 2

Answer
THIS IS AN AUTOMATED RESPONSE
TO YOUR DEI/VIPER/SIDEWINDER/HORNET/VALET
PYTHON/AUTOMATE/CLIFFORD/AVITAL/DESIGNTECH,
AUTOSTART, OR ANY OTHER DEI EQUIPMENT SERVICE
OR, SUPPORT REQUEST.

THERE ARE MANY, MANY THREADS REFERRING TO MY
POLICIES ON ANY REQUESTS ON DEI PRODUCTS
OR, FOR PRODUCT SUPPORT OF ANY KIND.
TRY WWW.INSTALLSUPPORT.COM TO GET ANSWERS
ON THIS FOR YOU.

PLEASE REVIEW THIS DISCLAIMER ON THE FRONT
PAGE OF THE SITE YOU JUST ASKED THIS QUESTION
FROM, WWW.CARPROTECTOR.COM

ALARMTEK