Car Alarms: Code Alarm car security, valet mode, dash area

Question
I purchased a used fleet 2004 Astro Cargo Van from HILTI. It has a Code Alarm installed in it. It has worked perfect until about a week ago. It does not double chirp upon arming anymore. It does still lock and unlock. The interior light is flashing twice all the time. Do you have any ideas? Thanks!

Answer
Should be no problem really.
It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, (PROBABLY THE LED IS ALSO THE VALET BUTTON!),
until the installed LED/VALET SWITCH (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm and the chirps

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM