Car Alarms: disable viper car alarm 1993 ford explorer, chirps, ford explorer

Question
remote starting to die, need to disable alarm. valet switch on side wall broken off years ago. Can this be done  thank you

Answer
Ok then, get over to the local car alarm shop,
or even a Best Buys will have a valet switch
that will fit for your alarm, or remove it for you.

In the mean time, locate the 2 wires that were
connected and are hanging free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM