Car Alarms: Micro 6007, slide tabs, brain box

Question
Where can I find instructions on programming a Micro 6007 alarm? I just
had the 'brain' changed out. It used to automatically arm about 30
seconds or so after I closed the car door... Now it doesn't.

Answer
Would also be the 6008 manual
See download in the support section at
www.mircoalarm.com

You need to use the inset bridge/slide tabs to
set it to "PASSIVE" arming.

Tip: Any changes made on these bridge/tabs
would only setup when you first power down the
brain box, make the changes to the settings,
then re power to take affect.

See this in the manual.

GL.

ALARMTEK