Car Alarms: Immobiliser, valet mode, skyline r34

Question
Just purchased a second hand skyline r34 left keys in the ignition while cleaning now car wont start .the motor sounds the same as a flat battery the lttle box under the dash makes the same noise the red light and hazard lights flash but no start the battery is new and i put it on charge alnight just in case Regards Andrew ManyThanks

Answer
Start with a fresh battery, then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This shou;d stop the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM