QuestionI had my viper 5901 installed in November on my 1994 mustang, and I haven't had any problems, until this past weekend. Late Saturday night the alarm triggered, after disarming the alarm, it went back off a second time. I disarmed and rearmed it again and it seemed to work. I was to sleepy to see which sensor was tripped, I looked out the window and saw nothing was wrong with the car so I went back to sleep. On Sunday I went out to start the car and the battery was dead. After jump starting the car it seemed back to normal, but I had the battery/ charging system checked out since I had just replaced the battery a few weeks ago(it had sat almost all winter and the battery was dead) The guy told me there is a 2.9 amp drain on the system. I am not sure if I should be looking for a faulty sensor/relay stuck open or if I should ignore the alarm and look for the problem elsewhere. The other thing I noticed is that when I do arm the alarm the indicator light blinks once per second which seemed much faster then I remember it blinking. Any help would be appreciated.
AnswerTHIS IS AN AUTOMATED RESPONSE
TO YOUR DEI/VIPER/SIDEWINDER/HORNET/VALET
PYTHON/AUTOMATE/CLIFFORD/AVITAL/DESIGNTECH,
AUTOSTART, OR ANY OTHER DEI EQUIPMENT SERVICE
OR, SUPPORT REQUEST.
THERE ARE MANY, MANY THREADS REFERRING TO MY
POLICIES ON ANY REQUESTS ON DEI PRODUCTS
OR, FOR PRODUCT SUPPORT OF ANY KIND.
TRY WWW.INSTALLSUPPORT.COM TO GET ANSWERS
ON THIS FOR YOU.
PLEASE REVIEW THIS DISCLAIMER ON THE FRONT
PAGE OF THE SITE YOU JUST ASKED THIS QUESTION
FROM, WWW.CARPROTECTOR.COM
ALARMTEK
