Car Alarms: 1995 dodge neon aftermarket alarm, override switch, dodge neon

Question
I've read through a lot of your past answers, and haven't found one that applies to my car. It has an aftermarket alarm. I Don't have a remote. The alarm won't turn off. There is no alarm switch or push button. There are several wires that come from the alarm module that aren't connected to anything. I couldn't see the make of the alarm, but it does have a S/N: 010050700447 (probibly won't help you any) I've tried lots of combinations of trying to reset the alarm, but apparently not the right thing yet. The car has been running fine for several years. Battery went dead, and since replacing it, I've had this problem. Can you help? Need more info? - Thanks

Answer
Sorry but if you can not locate the valet/override switch,
then removal is next. The valet switch is the KEY
to rectifying the state/mode of the alarm, without it,
no control.

I suggest getting the car's wiring at www.MYWIRES.com
and extract wiring one by one, until removed
and repaired safely.

Good luck.

ALARMTEK