Car Alarms: prestige aps996, valet mode, prestige aps996

Question
My alarm seems to be stuck in valet mode. The l.e.d is on solid, yet when I hit the lock/unlock button on the remote the doors lock/unlock and lights flash but no chirps and l.e.d remains solid. I do not see any type of valet switch under dash. Can I exit valet mode using remote?

Answer
It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM