QuestionI have a 2000 Pontiac GrandAM GT1 with a Viper 791 XV 2way Alarm/Starter. Vehicle works perfectly fine but only starts with remote starter only. Alarms was professionally installed and used to start with ignition key but no longer. When trying to use the ignition get the various dash lights speedometer & tach dials fire up as they should when starting but nothing happens no start signal to the starter... you can hear the fuel pump had ingaged. Had a garage check my ignition and they traced that all the correct feeds are working and it seems that the viper brain is not passing the start sequence through either because the brain is damaged/mulfuntioning or somehow accidently it has been told to ignor/bypass the key ignition start so it only starts by remote. I need help on how to tell/program the viper brain to allow me to start the car either method via ignition key or by remote not just the remote? I have been driving around starting with the remote for a 1.5yrs now... Thanks!
AnswerYour question triggered this
automated responce to a
DEI equipment support inquiry...
Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.
(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )
Please try my forum at
www.installsupport.com
Many of the technicians there can
assist you with this issue.
or you can write to my collegue & technician
Robert at: robert.mcfall@att.net
for assistance. (busy guy, please be patient.)
Good luck.
ALARMTEK
