Car Alarms: too sensitive, valet mode, dash area

Question
i have a very sensitive alarm and the only way to get in is with the remote and only works for the driver side door. if i leave the other side open the alarm will go off. how do i make it so it only opens and closes the door? i don't need the sound.

Answer
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm. The ony thing that would
work would be the keyless entry.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK