Car Alarms: 2003 Dodge Ram, valet mode, dash area

Question
I have a 2003 Dodge Ram with the silencer alarm, just recently the alarm has no sound, I mean it works and all but when I press to unlock it or lock it its just quiet , if I press the panic button the alarm goes off but no sound before the horn on the truck would sound off. Well Today I was driving and the doors unlocked and locked for less then 2 sec. Its never done this before should I consider the alarm as a goner?  

Answer
Should be no problem really.
It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM