Car Alarms: remote reprogramming, google search, crimestopper alarm

Question
i have a crimestopper alarm model#cs-2000dp-tw2.i had to get another remote fcc-id#m65tr5c.the manual says to turn on the ignition,press the valet button 4 times,then you get 4 chirps.then you press both the lock and unlock buttons at the same time and you should get 2 confirmation chirps and then turn off the ignition.i push the valet button,get 4 chirps,push both buttons like i am supposed to,but i get no confirmation chirps and the remote doesn't arm or disarm the alarm.is there something i'm doing wrong?or is there some "trick" that i need to know about?something special i need to know?  

Answer
THIS IS AN AUTO RESPONDER FROM
ALLEXPERTS.COM/ALARMTEK

SORRY, I DO NOT SUPPLY REMOTE TRANSMITTER
PROGRAMMING INFORMATION OF ANY KIND FOR ANY
AFTER MARKET OR, FACTORY SECURITY SYSTEMS
AS IT SAYS ON THE SITE YOU ASKED THIS QUESTION
FROM.( WWW.CARPROTECTOR.COM .)

PLEASE SEEK OUT THIS INFORMATION BY TRYING
A GOOGLE SEARCH FOR

"CAR ALARM REMOTE PROGRAMMING"

GOOD LUCK WITH
YOUR SEARCH.

ALARMTEK/RESIDENT CAR ALARM EXPERT
ALLEXPERTS.COM - CARPROTECTOR.COM