Car Alarms: 04 Ford Explorer alarm, release lever, reset switch

Question
I havae a Ford Explorer with a factory alarm. There is an LED on top of the dash that flashes when the alarm is armed, and another on the front left side of the dash that comes on when the alarm is set off.  That one is now constantly flashes 2 times even when I m driving.  There is a spring loaded reset switch behind the emergency break release lever that does nothing to stop the flashes. Any idea how to reset this light from flashing.

Answer
Hmmmm,
Make sure you do the procedure correctly.
Might have missed a step:

PUT IGNITION KEY IN IGNITION,
KEY ON TO JUST BEFORE CRANKING THE ENGINE.
PRESS IN AND HOLD VALET SWITCH
UNTIL YOU GET A RESPONCE
FROM THE ALARM.

KEY OFF.

This should toggle the alarm in and out of
valet/override.

I hope this solved it for you.

ALARMTEK