QuestionQUESTION: everything seems to be working ok - - alarm turns on and off, lights, radio, etc so i don't think it's the battery. the car won't start, as if the engine cutoff was activated when the alarm is set off. i tried to reset (turn it on and off) and then start the car again, but nothing happens. any help would be appreciated.
ANSWER: What did you do to try to reset it?
ALARMTEK
---------- FOLLOW-UP ----------
QUESTION: In the past when this happened, I only had to turn the alarm/lock on and off (lock / unlock) again and then the engine could be started. I saw a previous post about reseting the valet button under the dash and did try that as well but no luck. Thank you.
AnswerThen it's going to need to be removed
and repaired/replaced.
This vehicle's factory wiring for
installing car alarms, keyless entry and
remote starts is on file.
I sell this info online for these retro fit projects
with the proper wire colors, locations and polarities,
plus relay diagrams, tips and links to get it extracted
safely.
If this interests you, COPY CUT N PASTE
THE LINK BELOW TO PURCHASE
https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1-Vehicle+Specific+Wiring+Chart&item_number=1-Vehicle+Specific+Wiring+Chart&amount=4.99&no_note=1¤cy_code=USD
Or you can go to my site at
www.wirewerx.com and you'll have what you need
by email shortly after payment is received.
NOTE: ALARMTEK Is a LIVE SERVICE.
These requests are all done by hand when they come in.
Please follow payment with the MAKE, MODEL & YEAR of
the vehicle you are working on for your request to be expedited!
This will help you correct your trouble.
ALARMTEK-R. Martin
www.CARPROTECTOR.com
