Car Alarms: 1997 Honda Accord SE factory alarm wont reset = DEAD CAR, alarmtek, wire colors

Question
Hi,
I have a 1997 Honda Accord Special Edition.  The alarm has been killing the ignition on and off for about 2 weeks now.  I've been taking the brain (SY1) out from under the passenger seat and pulling the wire harness out and plugging it back in to reset.  It was getting me through until today.  I can not get the alarm to reset.  There is no 'switch' that i can find under the dash to reset the alarm.  I've looked in the trunk, center console, etc...  Please help.  I need this alarm gone so I can have a reliable car.

Answer
This vehicle's factory wiring for
installing car alarms, keyless entry and
remote starts is on file.

I sell this info online for these retro fit projects
with the proper wire colors, locations and polarities,
plus relay diagrams, tips and links to get it extracted
safely.

If this interests you, COPY CUT N PASTE
THE LINK BELOW TO PURCHASE

https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1-Vehicle+Specific+Wiring+Chart&item_number=1-Vehicle+Specific+Wiring+Chart&amount=4.99&no_note=1¤cy_code=USD

Or you can go to my site at
www.wirewerx.com  and you'll have what you need
by email shortly after payment is received.

NOTE: ALARMTEK Is a LIVE SERVICE.
These requests are all done by hand when they come in.
Please follow payment with the MAKE, MODEL & YEAR of
the vehicle you are working on for your request to be expedited!

This will help you correct your trouble.

ALARMTEK-R. Martin
www.CARPROTECTOR.com