Car Alarms: Alarm removal, bronco ii, color location

Question
I have a 88' bronco II, I don't know if the alarm was placed in by the dealership or after.  The name on the remote is MIRAGE x000 ( don't know what the 'x' is part of the plastic has torn away ) yes I did change the battery in the remote.  I need some diagrams and maybe pictures of the unit so that I may remove it.  The ride battery went down and when I recharged it, the alarm set up on me, there is an auto ignition cutout, the remote will not reset the alarm with either button.  I have a small switch and button on the inside wall near my feet driversside, they seem to do nothing at all, so I don't know if its part of the system or not.  I want to remove this completly or at least dissable it so I can use my ride properly.  Any drawings pictures schematics and advice will be greatly appreciated. thank you, have a fine day

Answer
I have Checked My Databases &
This Wire Color/Location/Polarity Data Chart
Is Available To Purchase For Only $4.99.
This will help to identify which wire is
connected to what under the dash and
allow for safe removal 1 by 1.

I Do These Requests By Hand, So I Assure
You That I sent This Letter Myself.
It Is Not An Automated Response.

Once Your Payment Is Received, I Will Compile
The Wiring Data You Require To complete
Your Installation Project, And Send Back The
Data In An Email To Print Out.

Good luck with your project
and best regards,

Robert Martin/Owner-MECP
ALARMTEK AUTO SECURITY
www.WIRINGCHARTS.com