Car Alarms: voyager car alarm, valet mode, dodge chrysler

Question
QUESTION: the car alarm on my voyager dose not work at all but the remote dose  lockes and unlock the doors

ANSWER: It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM

---------- FOLLOW-UP ----------

QUESTION: hi it is a chrysler alarm when locking the car the alarm set comes on the dash and then gose off after so long but can not get the alarm to sound or the lights to flash
thank you

Answer
Unfortunately my expertise is in after market systems.
The best suggestion would be to drive to
a local Dodge/Chrysler dealership and have them
evaluate the trouble. It may be something simple
& easy to fix.

The best always is to go to the "horses mouth" for
the best answer when talking OEM "factory" alarms

Sorry I can't be of more help.

ALARMTEK