Car Alarms: auto pursuit security system need to disable, valet mode, dash area

Question
hi-thanks for any help-my niece has a car alarm(pursuit security system)which was in the car when she got it 2wks ago-today it went off at a store and a passerby unplugged it-she has no remote key!now they can not get the car to start-they unplugged it from the battery,she got the car home and it went off again and wont start now- how do they disconnect this alarm permenantly? thanks again for any help

Answer
Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM