Car Alarms: 97 Subi outback After Market alarm Install, subaru outback, relays

Question
Hi have just picked up a Vision alarm for my 97 subaru outback. I've managed to wire the Immobilizer side of the alarm no problems but really need some help tapping into the existing factory central locking system. The Vision alarm lock and unlock outputs are -neg pulse for 0.5sec I don't have a clue how to make this type of output work on the subaru please help, kind regards Beau.

Answer
Get the chart for the car to find the correct wires,
but these are straight tapped
to the wires from the Vision. No relays required, as most
all alarm's door lock outputs are already negatives.

Just locate the door lock wires and tap the outputs directly.

Good luck

ALARMTEK
WIREWERX.com