Car Alarms: need to remove kill switch-like device, hyundai accent, wire colors

Question
I bought my '02 Hyundai Accent about a year and a half ago. When I test drove it the anti-theft device was disabled so I know it can be turned off. After I signed the papers they enabled it and gave me a small fob that I had to press onto three exposed pins to the left of my steering column before the engine will turn over. My roommate was using my car and lost my keys that have my only (of course) car key and deactivating fob. From what I can tell through online research the device is similar to what Ravelco offers except not as sophisticated. Information I have found also leads me to believe that by doing some rewiring I can override this system. I am mechanically and engineering inclined so this shouldn't be a problem, but I don't want to go in blind. Is there an online diagram or another resource that can guide me?

Answer
Yes, you can retro fit.
I sell this info online for these projects
with the proper wire colors, locations and polarities,
plus relay diagrams, tips and links to install or,
in your case trouble shoot & reset.

If this interests you, go to www.wirewerx.com
and you'll have what you need by email shortly.

Thank you for your interest
in my wiring chart services.

ALARMTEK-R. Martin
www.CARPROTECTOR.com