Car Alarms: Car Alarm, valet mode, ford taurus

Question
I have a 95 Ford Taurus and just installed a new Starter. When i go to turn it on the alarm goes crazy and the car wont start. After removing the starter, getting it checked, and reinstalling it, the car turned on again and the alarm went crazy. The car wont turn on now unless i remove the starter again. I was told i could simply disconnect the alarm to plug the starter directly into each other so the car would start. How do i do so?

Answer
Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM