Car Alarms: Repeaters flashing when doors opened, car doors, coil wire

Question

Cyclone C-300 alram wi Hi guys,

I have put a Cyclone C-300 remote start alarm into my car, and with the help of your tech's have got the remote start function working correctly - thankyou so much. The only issue that i have now is that when the car doors are opened, with the alarm un-armed, the side repeater lights flash continuously. When the doors are re-closed the repeaters stop flashing. When armed and the doors are opened, the alarm goes off. Do you know where i might have wired wrong?

I have attached a copy of the alarm wiring diagram that I wrote on when i didnt understand the high coil wire, so please ignore that.

Thanks, really looking forward to your response.

Kind Regards,

Kenny

Answer
Might be on the wrong wires in the car for the flashing lights.
Seem to be on the hazard circuit. You need the parking
light wire.

I would get the wiring chart (wirewerx.com)
for this vehicle, and re check the connections.

Something is incorrect. I think it's eithter the
door trigger wire is incorrect, or the light flashing circuit.

ALARMTRK