Car Alarms: Camry 2005 alarm issue, toyota camry 2005, valet mode

Question
Hi, i wonder if someone can help me on this issue...
I have a Toyota Camry 2005 with factory instaled alarm system that for some reason doesnt work. I wonder if they disconnected the alarm at the dealership. So yea... when i close my car from the inside, the security light goes on, and when i open the door from inside nothing happeneds? Does anybody know why my security alarm might not work? Is there a way to reset it or turn the alarm back ON?
Thank You

Answer
Should be no problem really.
It appears from your expaination, that the
after market car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM