Car Alarms: Viper Remote, 1995 oldsmobile aurora, viper remote starter

Question
We have a Viper Remote starter installed on our 1995 Oldsmobile Aurora. Just recently the remote stopped working. We can unlock/lock, start the car...everything! Except the screen is supposed to show whether it's locked or not or whether it's started etc but it does not. It does not beep to let us know whether the car did what it was supposed to or not. It has a stock beep that it does every time you push a button though that beeps 3 times 3 times in a row. Is this a remote problem or is there a problem with the actual system? Thank you!

Answer
Your question prompted this
automated responce to a
DEI equipment support inquiry...

DEI EQUIPMENT SUPPORT SERVICES ARE NOT
PART OF THE INFORMATION THAT I OFFER HERE
AT ALARMTEK.

You must have missed that big note I placed
on the ALLXPERTS site about VIPER and
about remote programming. (www.CARPROTECTOR.com)

You have the wrong guy here. I don't
provide support for DEI equipment or they're
clientel, PAST or PRESENT.

Too many people have been asking
for the service they should be providing, and
I won't do they're job here any longer.

I now refer these inquiries to either my forum
at www.installsupport.com, www.directed.com
or, I even have a couple of guys at
sales@tampacaralarms.com or,
ctursi@optonline.net , who might be able
to offer some insight.

Both good guys and they will treat
you right.

Good luck with your
DEI info quest.

ROBERT MARTIN/Owner
ALARMTEK AUTO ALARM
CARPROTECTOR.com