Car Alarms: consulta, valet mode, dash area

Question
estimado Sr. junto con saludadrlo mi motivo por el cual me dirijo a ud. es para saber sobre las alarmas como se pueden volver a su normalidad despues que presentan una falla al no funcionar correctamente cual seria el procedimiento para solucionarlo en una forma estandar o sea en general

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

Good luck

ALARMTEK