Car Alarms: 1994 Eclipse Factory Installed Alarm, valet mode, mitsubishi eclipse

Question
After replacing the battery on my 1994 Mitsubishi Eclipse GS the alarm is engaged.  The keyless entry and key entry are not dis-engaging the alarm.  The alarm keeps going off and the car will not turn over.  Is there any way to bypass this system?

Answer
Ok, we know from the make, model & year
that it's an after market system you have there.

To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM