Car Alarms: 2000 Honda Passport, honda passport, valet mode

Question
I posted a previous question regarding a kill switch problem  but I do not know if the info on the make and model of car was included. It is a 2000 Honda Passport. The remote entry id is "FCC ID: H50T21, IC:1640B-T01. The problem: battery died and replaced, lights and horn energized and kill switch apparently prevent car from starting. Thanks for help

Answer
It's likely to be after market.
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM