Car Alarms: Pursuit Series PROO3EC Valet located, valet mode, alarmtek

Question
Well i'm recently lost my keys so I had to order another remote to Audiovox Pursuit series PROO3EC remote. However the car came with it and I'm not sure where the valet is location. I managed to locate the black box that ticks everytimes the alarm is activiated but I try to trace al the wires but I just do know where the valet switch is or what it looks like. Any help would be greatly appriecated.


Answer
Allright, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

Follow your manual for instructions to
program your new remote.

ALARMTEK