Car Alarms: Car wont start, mitsubishi fto, keyless entry systems

Question
Hi, i have a problem with my Mitsubishi FTO. It has a Clifford alarm, not sure what model but the key remote has two buttons, and i has recently changed the head unit. When i was removing the head unit it had two earthing wires (black) attached to the screw on the bracket of the head unit. Once i had reconnected the wires the car wont start, the lights come on in the dash but the immobilizer wont let me start the car, it just makes a clicking sound. Please could you tell me how to reset the alarm.

Answer
Your question triggered this
automated responce to a
DEI equipment support inquiry...

Sorry, due to a mutual agreement
between Directed Electronics & myself,
Questions or, support for DEI car alarms,
or remote start/keyless entry systems
will NOT be provided here.

(Please take note of the disclaimer
I posted at the ALLEXPERTS.com site
www.CARPROTECTOR.com )

You can either try www.directed.com or,
take this question to my online 12 volt
installation Technican forum
at www.installsupport.com.

Many of the technicians there can
assist you with this issue.

Good luck.

ALARMTEK