Car Alarms: Car wont start because of alarm, valet mode, dash area

Question
Hello- I have a PT Cruiser with an after market alarm.  I do not use it, but today when I opened the door, the alarm started going off.  I pushed a buttom down on the bottom console and the alarm went off, but the problem now is that my car will not start.  How can I fix without spending a fortune?  I don't care if the alarm works or not since I don't presently use it. Please Help:)

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM