Car Alarms: valet mode, valet mode, shock sensor

Question
I have recently purchased an omega/excalibur alarm system. And for some reason  the alarm is constantly in valet mode. I can still use my lock, unlock feature. but my dome light and shock sensor doesn't work. Is there a way to reset the alarm?

Answer
Should be no problem really.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area, usually to the
left of the leg drilled into a hidden away spot,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.
Let me know what happens.

ALARMTEK
INSTALLSUPPORT.COM