Car Alarms: Lost remote, valet mode, dash area

Question
I lost the remote for my keyless entry for my car. The alarm was installed before I bought my car and I don't know what kind it is. Now when I open my door with the key the alarm sounds and the engine won't turn. What can I do?

Answer
Ok, mark,
  To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, to try to identify,
and get new remotes for it. To get the notes
for removing it, go to www.wirewerx.com .

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM