Car Alarms: chapman alarm, chevy blazer, butt connector

Question
i have a 1996 chevy blazer i bought it with an chapman alarm system the alarm
burned out and now my truck does not turn on due to the alarm.... can you
please help me disable the starter kill because it is what is causing my truck not
to turn on..... thank you for your time and consideration in this matter

Answer
I can help.
  Under the dash area, locate the YELLOW
wire off of the ignition switch. On it,
you will see the relay that was installed
for starter kill. You'll need a yellow butt connector.
Cut off the relay, and re attach the 2 free ends
of the starter wire back together.

Problem solved. Then remove the old alarm
and drive on. That should do it.

Good luck.

ALARMTEK