Car Alarms: 2000 Camry CE Alarm Stopped Working, toyota camry, power wires

Question
I have a 2000 Toyota Camry CE with a stock alarm system.  Everything was working great and suddenly the whole alarm subsystem seems to be dead.  The remotes (all 4) suddenly do not work.  The dash alarm light is out (does not appear to be turned off), I tried resetting the alarm and even removing the battery but to no avail.  I also tried to check all the fuses with my voltmeter, but they all check out.  Is there a relay for the alarm system? What should I be checking next?  None of the manuals I can find show which fuse goes to the alarm system.

Answer
I think an inspection of the fusable linked wires,
off of the ignition key for the alarm would be
the first place to look.  From the description,
The system's power has been disturbed/disconnected.

This sounds after market by the way. From the LED to the
4 remotes, to the power stopping ALL function related to it.

Start by tracing the power wires (probably red and yellow)
and any fuses found inline. These will be found under
dash at the ignition switch if installed right.

Good luck.

ALARMTEK
CARALARMMAN.COM