Car Alarms: 1995 FORD CONTOUR OEM ALARM, ford contour, valet mode

Question
I HAVE A 1995 FORD CONTOUR WITH OEM ALARM  IS THERE ANYWAY TO DISARM IT OR REMOVE IT OR ANYTHING CAUSE IT MADE MY CAR SO I CANT START IT LITTLE RED LIGHT FLASHING AND LIGHTS FLASHING ANY INPUT CAN HELP THANX

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no
alarm at all. Repeat steps to put into user
mode.

ALARMTEK
CARALARMMAN.COM