Car Alarms: Need help, alarmtek, dash area

Question
QUESTION: Sir, Pls explain me how to stop the alarm 1995 dodge Interpid as by some reason it keep horning so pls let me know how to diffuse?
pls reply me soon.
Thanks.

ANSWER: Please be more descriptive if possible.

"GOING OFF?"

I need to determine whether it's a factory alarm
issue or, if it's an aftermarket system you are
dealing with.

Is it: Headlights flashing, car horn honking
and a worded SECURITY" light in the dash flashing?
(doubtfull since none of the notes show this
car as having a factory alarm system)=FACTORY

Or,

is it: flashing parking lights,
an LED in the dash area, and a siren
going off?= AFTER MARKET

Let me know more on this to better
advise you on a course of action
to take.

Best Regards,

Robert Martin
CEO/ALARMTEK
CARALARMMAN.com

---------- FOLLOW-UP ----------

QUESTION: sir its factory alarm system. Pls let me know how to disable it.
thanks,
bye

Answer
ok, not a problem.

Get out some basic install tools or get
a friend or a good technician
in there to do this.

Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. Yours was reset.
Try key in the drivers door, turn left, then
right to diasrm and unlock. If no joy,
you can disable it for good by doing the
following:

The FACTORY ALARM DISARM WIRE IS
lt.green/orange 20 guage |-| Located
in either kick panel.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the OEM alarm functions entirely.

Have a good evening.