QuestionI purchased a 1997 jetta w/manual trans,that has a clifford g5 intellishield 750 that is also used for the door poppers. The batery went dead. tried jumping. when hooked up the jumper cables the flashers started flashing. went to start the car but won't. won't even crank. waited a while and the flashers stoped. tried to start but as soon as i turned the key the flashers started again. down load manual off net and tried different codes to disable alarm but to no avail. tried disconnecting the box but lashers were still going. i want to remove the system but i need wire diagram but also stil need it for doop poppers. any hel would be greatly appriciated.
AnswerYour question prompted this
automated responce to a
DEI equipment support inquiry...
Sorry, due to legal agreement,
I don't do the support for those
systems here. Try www.directed.com or,
I refer these folks to either my forum
at www.installsupport.com or, I even have a
couple of guys at sales@tampacaralarms.com or,
ctursi@optonline.net , who might be able
to offer some insight.
Both good guys and they will treat
you right..
Sorry I could'nt be of more service.
ALARMTEK
